Original
By certification 
SFP GE LX compatible SFP transceiver supports up to 10km link lengths over LC duplex SMF fiber or up to 550m link lengths over LC duplex MMF fiber. Each SFP transceiver module is individually tested to be used on a series of Cisco/Juniper/Huawei switches, routers, servers, network interface card (NICs) etc.
Featuring low power consumption, the hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Item Spotlights
● Hot-pluggable SFP form factor
● Supports 1.25Gb/s aggregate bit rate
● Power dissipation<1W
● Commercial case temperature range of -40°C to 85°C
● Single 3.3V power supply
● Maximum link length of 10km on Single Mode Fiber (SMF)
● Aligned with IEEE 802.3z
● 1.25G NRZ -based 1310nm transmitter
● 1.25G NRZ retimed electrical interface
● Duplex LC receptacles
● I2C management interface
● RoHS compliant
Description
| Compatible | SFP GE LX |
Vendor Name |
FB-LINK |
Form Factor |
SFP |
Max Data Rate |
1.25Gbps |
Wavelength |
1310nm |
Max Cable Distance |
10km |
Connector |
Duplex LC |
Media |
SMF/MMF |
Transmitter Type |
FP |
Receiver Type |
PIN |
TX Power |
-9.5~-3dBm |
Receiver Sensitivity |
＜-23dBm |
MTBF(LX) |
2583979 Hours |
Receiver Overload |
-3dBm |
Power Consumption |
≤1W |
Extinction Ratio |
＞9dB |
DDM/DOM |
Supported |
Commercial Temperature Range |
0 to 70°C (32 to 158°F) |
Protocols |
IEEE 802.3ah-2004, IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) Compliant |
Warranty |
3 Years |
Questions & Answers
Q:Does #work with Cisco C9300 devices?
A:Yes, it is compatible.
Q:Looking for a Single Mode SFP module for Cisco Network Switch 2960 series, can be used with it?
A:Yes, they can work together well.
Q:Is this compatible with the 24-port UniFi switches that have SFP but not SFP+ ports?
A:Yes, it's compatible.
Q:I'm in need of 15 of the 1000base fiber transceiver. This is for Cisco SG350 switches and all under 1km runs. But I don't know the specific model, but only know that it supports SFP, so which one I should choose?
A:Hi, Cisco compatible SFP GE-LX module，can meet your needs, it can be connected normally when tested on our Cisco SG200.
http://www.100gmodule.com/
